All Categories

Product News

You are here : Home > News > Product News


Time : 2023-07-12 Hits : 13

Vinyl flooringis typically made of polyvinyl chloride (PVC) resin, a type of plastic. It may also contain fillers, pigments, and other additives to improve its durability, appearance, and performance. To make them more environmentally friendly, some vinyl flooring products may also contain recycled materials, such as old vinyl flooring or plastic bottles. The PVC is used to make a thin film which can be printed on to give the appearance of wood, tile or other materials. This is then glued to a substrate, usually wood- or wood-based materials, to create the finished product.

How do you clean vinyl flooring?

To clean vinyl flooring, it is recommended to use the following steps:

1. Sweep or vacuum the floor to remove any loose dirt or debris.

2. Make a cleaning solution by mixing a small amount of mild detergent (such as dish soap) with warm water. Avoid using abrasive cleaners or vinegar, which can damage the surface of the vinyl.

3. Dip a mop or rag into the cleaning solution and wring out any excess liquid.

4. Clean the floor by mopping or wiping it with a damp mop or rag, being careful not to saturate the floor with too much water.

5. Rinse the mop or rag with clean water and wring it out again.

6. Use the clean, damp mop or rag to remove any remaining soap residue from the floor.

7. Dry the floor with a clean mop or towel to prevent water spots and streaks.

It’s important to note that some types of vinyl flooring may require special care or cleaning methods. Hence, it’s always best to consult the manufacturer’s instructions before cleaning your vinyl flooring. Additionally, it’s best to avoid using steam cleaners, as the heat and pressure can cause the adhesive underneath to weaken over time.

What happens if vinyl flooring has a fold in it?

If vinyl flooring has a fold, it may be caused by improper installation or the product itself. For example, it can be caused by the vinyl needing to be laid out flat before it was installed or by not allowing enough room for the vinyl to expand and contract with temperature changes.

A fold-in vinyl flooring can be unsightly and can cause tripping hazards. It can also cause the edges of the vinyl to come apart, which can be challenging to repair. Sometimes, the fold may be corrected by applying heat to the area with a hair dryer or heat gun and then using a roller or a flat object to press out the fold. However, fixing it is not always possible, and it may require the replacement of the affected section of the flooring.

It’s essential to check the flooring for any folds or wrinkles before installing it and to ensure that the room is at the correct temperature before and during installation. If the fold is caused by a defect in the product, it’s best to contact the manufacturer or the place where you purchased the product for advice on how to proceed.

Can you iron out a crease in vinyl flooring?

It is possible to use heat to try and iron out a crease in vinyl flooring, but it is not guaranteed to be successful, and it can be risky. For example, using a hair dryer or heat gun to apply heat to the crease area and then using a roller or flat object to press the crease. However, this method can be risky as it can cause the vinyl to warp or melt if the temperature is too high or if the heat is applied too long. Additionally, if the crease is caused by a defect in the product or installation, the heat may only temporarily fix the problem, and the crease may reappear.

It is crucial to remember that using heat to fix a crease in vinyl flooring is not recommended by manufacturers or professional installers. If the crease is caused by a defect in the product, it’s best to contact the manufacturer or the place where you purchased the product for advice on how to proceed. If the crease is caused by improper installation, consider consulting a professional flooring installer to fix the problem.

How to look after vinyl flooring

Overall, it’s best to take precautions and avoid getting creases in the first place by correctly storing and installing the vinyl flooring. If you order vinyl floor products fromHamyeewallpaper, we can almost guarantee that it will make your business sparkle. We very rarely deliver vinyl flooring that is creased because of the warehouse checks that our internal team does. We take great care in ensuring that our customers receive only the best service. From our headquarters in Changsha, to our logistics and delivery, we offer only the best.